LP - Mr-Glass Doors & Windows Manufacturing

The impact door other doesn't build.

Hydraulic pivot doors up to 1,200 lbs. Thermally broken 2.875″ entry systems. Custom architectural panels in 24 patterns. Built 20 miles from your project — not somewhere on a volume line.

Get a free quote from your local dealer

"*" indicates required fields

Independently certified

Independently certified. Engineered to surpass code standards.

Every Mr-Glass system is third-party tested and carries Florida Product Approval for High Velocity Hurricane Zones. Design pressures verified to ±80 PSF. Large Missile Impact rated. No exceptions, no asterisks — just documented performance you can hand to your inspector on day one.

24

hrs Dealer match

1,200 lb

Pivot capacity

±80 PSF

HVHZ rated

25+ yrs

Made in FL

MG-4000 Pivot · 1,200 lb

FL#47317.1 approved

Large Missile Impact rated for HVHZ

What "custom" actually means

The MG-2500T thermal break.

The single piece of engineering that separates a premium architectural entry door from an “impact-resistant” commodity.

Florida summers hit 92°F outside while your AC holds the interior at 68°F. A standard aluminum door expands as one piece — and within two summers, the lock drifts out of alignment.

The MG-2500T is built from two interlocked aluminum profiles with a polyamide thermal break between them. Interior and exterior expand independently. The lock stays aligned. The door operates the same on day one as it does in year fifteen.

Most impact doors are built to survive. The MG-2500T is built to survive and operate — quietly, accurately, for decades. That’s the difference between a hurricane spec and an architectural entry door.

MG-2500T spec sheet

2.875"

Profile depth — engineered for the structural and thermal demands of a true entry door.

400 lb

Hinge pair capacity at the maximum dimensions of 60″ × 120″.

±70
PSF

Design pressure rating with concealed hinges and low threshold detail.

105°

Opening angle. Optional fully concealed closure. Opens flush to the wall.

Thermal break you can feel

Two interlocked aluminum profiles allow controlled expansion — lock alignment stays perfect through Florida summers.

Pivot without floor cuts

Hydraulic pivot in the bottom rail with damper control. No floor penetration. Up to 1,200 lbs.

HVHZ without compromise

Florida Product Approval for High Velocity Hurricane Zone. Design pressures to ±80 PSF. Large Missile rated.

Certifications & Approvals

Independently certified. Engineered to the highest codes.

Every Mr-Glass product is tested and approved by the most demanding regulatory bodies in the country — from the Florida HVHZ to the Texas Department of Insurance.

The honest comparison

Why Mr-Glass, not the volume brand.

Volume brands build great commodity windows. We build custom architectural doors for homes where the entry is the statement.

Feature

Mr-Glass

Typical volume manufacturer

Custom sizing up to 60" × 120"

Hydraulic pivot doors (1,200 lb)

Thermal break (no lock drift)

Siegenia multi-point + biometric

24 architectural patterns + custom

HVHZ Florida Product Approval

Vetted single-dealer match

Testimonials

The proof is in South Florida.

⭐⭐⭐⭐⭐ 4.9 from 340+ South Florida homeowners

⭐⭐⭐⭐⭐

“Two hurricanes since install. Zero calls to the dealer. The pivot still closes like the day they hung it.”

Carlos M.

Coral Gables · Custom home

Saved $2,840/yr on insurance

⭐⭐⭐⭐⭐

“We spec’d Mr-Glass against three other manufacturers. Nobody else could build the 10-foot pivot in black with the hardware we wanted.”

Avanti Design Studio

Miami Beach · Architect

Lead time hit: 9 weeks

⭐⭐⭐⭐⭐

“I’ve installed every brand on the market. The tolerances on these frames are tighter — and the dealer support is on a different level.”

Ricardo A.

GC · Broward County

Callback rate: under 2%

What happens after you submit

No call center. No bait & switch.

You’re matched with one vetted dealer. They handle measure, quote, install. We handle the door.

Submit

Zip + phone. 10 seconds.

Match

One vetted dealer in 24 hrs.

Consult

Free in-home measure & quote.

Install

Built in Medley. 8–12 weeks.

Straight answers

Questions buyers actually ask.

What does a Mr-Glass door cost?

A typical impact hinged door installed runs $8,500–$18,000. A custom pivot door with premium hardware typically falls between $22,000 and $45,000 installed. Your matched dealer provides a firm quote after measure.

How long from order to installed?

Standard: 6–8 weeks. Custom configurations with oversized pivots or special finishes: 8–12 weeks. We manufacture in Medley, FL — shorter and more reliable than imported alternatives.

Will I qualify for an insurance discount?

Yes. Every Mr-Glass door carries Florida Product Approval for HVHZ with full documentation. Homeowners typically see wind mitigation credits ranging from several hundred to several thousand dollars per year.

What's the warranty?

AAMA 2604 finish: 5-year warranty. AAMA 2605 upgrade: 10-year. Hardware and mechanical components covered per manufacturer spec.

Ready when you are

Start your project with the manufacturer, not a middleman.

One vetted dealer. One quote. Built 20 miles from your project. Get matched in 24 hours — guaranteed.

Or call us direct: 305.764.3963

The Mr-Glass promise: If your matched dealer doesn't call you within one business day, call us at 305.764.3963 — we'll personally dispatch a senior dealer. We own the outcome.

© 2026 Mr-Glass Doors & Windows Manufacturers. All rights reserved. | Web Design & Marketing by Live Media Digital