Mr Glass | South Florida's Impact Window Manufacturer
Residential Impact Windows Built for Florida's Worst
Most impact windows protect your home from storms. Mr Glass impact windows do that — and they do it without the noise, rattle, and hum that other windows leave behind.
The Best Impact Window Brand Is the One Made for Florida
Plenty of window companies sell impact glass. Mr Glass is different — we manufacture every window at our facility in Medley, Miami. That means our engineers designed each product with one environment in mind: South Florida. No compromises, no generic solutions shipped from out of state.
Made in South Florida
Our manufacturing facility is in Medley, Miami. Every frame, every pane, every seal is produced locally — for local conditions — with local quality control.
Engineered for Category 5
Our residential impact windows are tested and certified to withstand the debris, pressure, and wind loads of the most severe Atlantic hurricanes, not just minimum code thresholds.
Extreme
South Florida summers are relentless. Our laminated glass and thermally optimized frames reduce solar heat gain, keeping your home cooler and your energy bills lower.
Miami-Dade NOA Certified
Miami-Dade County's High-Velocity Hurricane Zone (HVHZ) standards are the toughest in the United States. Every Mr Glass residential window carries the required Notice of Acceptance.
Factory-Direct Value
Because we manufacture what we sell, you get premium performance without the premium markup. No middlemen, no imported markups — just honest, direct-from-manufacturer pricing.
Salt Air & Coastal Ready
Coastal corrosion destroys ordinary windows within years. Our impact windows are designed to resist salt spray, humidity, and the relentless coastal environment of South Florida.
South Florida Made.
South Florida Strong.
At 8051 NW 79th Pl in Medley — the heart of Miami’s manufacturing corridor — our team designs, engineers, and builds every residential impact window from raw materials to finished product. This is just one of our Miami manufacturing plants. We don’t import, rebrand, or re-box. We manufacture.
That local origin is critical. Florida’s climate demands aren’t theoretical — they’re measured in sustained 185 mph winds, 140°F attic temperatures, driving coastal rain, and ultraviolet radiation that fades and degrades inferior materials in just a few seasons. Our engineers have spent years perfecting products that hold up to every one of these conditions, because they live here too.
When you choose Mr Glass, you’re choosing a manufacturer that knows Florida from the inside out — and that stands behind every window we produce with a comprehensive warranty and local support.
185+
MPH Wind Rated
HVHZ
Miami-Dade Certified
15+
Product Series
When Florida's Worst Hits, Your Home Holds
South Florida sits in one of the most hurricane-prone corridors on Earth. Our residential impact windows aren’t built to the minimum — they’re built to the maximum. Every product is engineered to protect your family, your home, and your belongings when a major storm makes landfall.
Category 5 Wind Resistance
Tested to withstand sustained winds and pressure differentials that exceed major hurricane classifications — not just baseline code requirements.
High-Velocity Debris Impact
Our laminated impact glass is tested against the 9-pound 2×4 lumber large missile test and small debris cannon tests required under HVHZ protocols.
Storm-Driven Rain Resistance
Precision-engineered seals and frame profiles prevent water infiltration even under the extreme pressure of hurricane-force rain.
Structural Pressure Loads
Positive and negative design pressure ratings exceed Florida Building Code requirements for high-velocity hurricane zones, keeping your envelope sealed when it matters most.
No Hurricane Shutters Needed
Mr Glass impact windows provide permanent protection — no deploying shutters, no boarding up, no last-minute scramble before a storm.
Whole-Home Protection
From single-hung windows to large picture windows and sliding glass doors, every opening in your home can be protected with a matching Mr Glass product series.
Built for Florida's Extreme Heat — Not Just Its Storms
South Florida’s summers push outdoor temperatures well above 90°F with heat indices regularly exceeding 105°F. Standard windows trap solar heat, drive up cooling costs, and deteriorate rapidly under this level of UV exposure. Mr Glass residential impact windows are engineered specifically for this environment.
Low-E laminated glass reflects infrared solar radiation, reducing the heat entering your home without blocking natural light.
Thermally optimized aluminum frames resist expansion, contraction, and warping under extreme temperature swings.
UV-blocking interlayer filters over 99% of harmful ultraviolet rays that fade furniture, flooring, and artwork.
Energy code compliant — our windows meet Florida’s strict energy efficiency requirements, contributing to ENERGY STAR compliance for your home.
Reduced cooling load means your AC system works less, extending its lifespan and cutting monthly utility bills year-round.
Glass Performance at a Glance
>99%
UV Blocked
Low-E
Glass Available
FL Code
Energy Compliant
Florida’s climate demands a window that works as hard in July as it does in October. Our laminated glass options include clear, tinted, and Low-E configurations — all compatible with our full residential series.
Ask about our energy values documentation, which includes SHGC, U-Factor, and VT ratings for every product series. Download Energy Values →
Impact Windows & Doors for Every Home
From classic single-hung windows to floor-to-ceiling sliding glass doors, every product in the Mr Glass residential line is manufactured in South Florida, Miami-Dade HVHZ certified, and backed by a comprehensive product warranty.
Series MG-200
Impact Resistant Single Hung Window
A Florida classic, reinvented for maximum storm protection. The MG-200 is one of our most popular residential windows — reliable, elegant, and fully HVHZ certified.
Series MG-250
Single Hung Window Wall System
Series MG-300 / MG-350
Impact Resistant Horizontal Sliding Window
Series MG-350 / MG-400 / MG-450
Impact Resistant Fixed Picture Window
Series MG-600
Impact Resistant Casement & Awning Window
Series MG-1000 / MG-1100 / MG-1500
Impact Resistant Sliding Glass Door
Series MG-3000
Impact Resistant Swing Door
Series MG-3500
Residential Entry Door
Series MG-4000
Impact Resistant Pivot Door
The Strictest Standards in the United States
Miami-Dade NOA
Notice of Acceptance for all products in Miami-Dade's High-Velocity Hurricane Zone
Florida Building Code
Full compliance with Chapter 14 and the Florida Product Approval system (FL Numbers)
HVHZ Requirements
Tested and approved for High-Velocity Hurricane Zone — the highest U.S. standard for impact-resistant fenestration
Florida Energy Code
Meets Florida's stringent energy efficiency standards, including SHGC and U-Factor requirements
Third-Party Impact Tested
All products tested per ASTM E1886/E1996 and TAS 201/202/203 by certified independent laboratories
Common Questions About Residential Impact Windows in Florida
What makes Mr Glass the best impact window brand for South Florida?
Mr Glass is one of the very few impact window manufacturers that actually produces its windows in South Florida — at our Medley, Miami facility. That means our products are designed and tested specifically for the climate, wind loads, and code requirements of the region, not adapted from products built for other markets. We also offer full Miami-Dade HVHZ certification across our residential product lines and direct-from-manufacturer pricing with no import markups.
Are impact windows in Florida required by law?
In many areas of South Florida — including Miami-Dade and Broward counties — impact-resistant windows or an approved alternative (such as hurricane shutters) are required by the Florida Building Code for all new construction and major renovations. In Miami-Dade's High-Velocity Hurricane Zone, the requirements are even more stringent, requiring products with a valid Notice of Acceptance (NOA).
Do impact windows help with the Florida heat?
Significantly. Impact windows with Low-E glass coatings reduce solar heat gain, blocking the infrared radiation that heats your interior without reducing visible light. This can meaningfully reduce your cooling load and monthly utility bills — an important benefit in South Florida where air conditioning runs for most of the year.
Can impact windows withstand a Category 5 hurricane?
Mr Glass residential impact windows are tested and rated to withstand the wind pressures and high-velocity debris associated with major hurricane events. Our products meet or exceed the Miami-Dade HVHZ and Florida Building Code requirements, which represent the highest standards for hurricane fenestration in the United States. While no product can guarantee a specific outcome in every storm scenario, our windows are engineered to protect your home in the most severe conditions that South Florida faces.
Do I still need hurricane shutters if I have impact windows?
No. When your entire home's openings are protected with Miami-Dade NOA-certified impact windows and doors from Mr Glass, you have permanent hurricane protection. You won't need to store, deploy, or maintain traditional hurricane shutters. This is one of the most valued benefits our residential customers cite — especially before a storm when time is short.
Where are Mr Glass windows manufactured?
Every Mr Glass window and door is manufactured at our production facility located at 8051 NW 79th Pl, Medley, Miami, FL 33166. Manufacturing locally allows us to maintain strict quality control, respond quickly to customer needs, and produce products that are genuinely optimized for South Florida conditions.
How do I get pricing for residential impact windows?
Contact us directly through our Request a Quote page or call us at 305.764.3963. You can also find an authorized Mr Glass dealer near you for installation and pricing in your area.
Ready to Protect Your Home with the Best Residential Impact Windows Available?
Get a free quote from Mr Glass — South Florida’s local impact window manufacturer. Our team will help you find the right residential products for your home, your budget, and your protection needs.
📍 Manufactured in Miami, FL | 📞 305.764.3963 | ✉️ sales@mrglasswindows.com
